Xitanium LED Xtreme Drivers – SR (Sensor Ready)

Xitanium LED Xtreme Drivers – SR (Sensor Ready)

The Xitanium LED Xtreme Drivers – SR (Sensor Ready) are intelligent LED drivers for professional connected lighting. The series combines the ruggedness of the Xtreme platform with a special Sensor Ready interface. This allows sensors and communication modules to be integrated directly into the luminaire system.

In addition, the drivers are suitable for modern smart-city solutions. This makes them a future-proof foundation for professional outdoor and industrial lighting.

Sensor Ready for Connected Lighting

The integrated SR Interface enables communication with smart sensors and wireless modules. As a result, fewer separate components need to be incorporated into the fixture.

In addition, the driver can work directly with smart photocells and compatible lighting management systems. This simplifies the integration of connected lighting.

D4i-certified

The Xitanium LED Xtreme SR series complies with the D4i Intra-Luminaire Standard from the DALI Alliance. This allows the driver to exchange standardized information with compatible sensors and network components.

In addition, D4i provides data on energy consumption, diagnostics, and operational status. This allows administrators to gain greater insight into the system's performance.

Integrated Power Supply for Sensors and Wireless Modules

The SR drivers feature integrated power supplies for sensors and wireless communication modules. As a result, it is not always necessary to install a separate power supply for these components.

This reduces the number of components in the fixture. In addition, it can improve the reliability and simplicity of the entire system.

Energy Consumption Measurement and Diagnostics

A key advantage of the Sensor Ready series is the integrated energy consumption measurement. This allows a connected management system to monitor current and historical energy consumption.

In addition, the drivers support comprehensive diagnostic data. This enables connected systems to identify problems more quickly and plan maintenance more effectively.

DALI and SR Control

Support the current versions DALI and SR. In addition, the family offers programmable features for professional lighting management.

Depending on the selected model and configuration, the following options, among others, are available:

• DALI control
• Sensor Ready Interface
• D4i Communication
• SimpleSet Configuration
• Constant Light Output
• Temperature Protection Module
• Connected Energy Consumption Monitoring
• Diagnostic Information

Wireless Configuration with SimpleSet

The integrated SimpleSet- The interface enables wireless configuration of the driver. This allows settings to be adjusted during production or maintenance without a traditional programming connection.

In addition, the same driver can be used more easily with different fixture configurations.

Constant Light Output

The series supports Constant Light Output (CLO). This allows the driver to account for the gradual decrease in the light output of LED modules.

As a result, the desired light level can be maintained more consistently throughout the system's service life. In addition, this helps minimize unnecessary oversizing when the system is first put into service.

Protection of the LED module

The Xitanium LED Xtreme SR drivers support Temperature Protection Module. This allows the system to respond if the temperature of the LED module rises too high.

This provides better protection for the LED module against thermal overload. In addition, this can help extend the system's service life.

IntelliStart for lower inrush currents

For certain power levels, Signify uses IntelliStart. This technology limits the driver's inrush current.

This allows more drivers to be connected to a single compatible installation controller. This can be particularly advantageous for larger professional installations.

Wide power range

The current Xitanium LED Xtreme SR family includes multiple power ratings. This allows the driver to be tailored to a wide range of LED fixtures.

• 22W
• 40W
• 75W
• 110W
• 150W
• 165W

In addition, various output currents and output voltages are available. As a result, the product family offers professional luminaire manufacturers a great deal of design flexibility.

Input voltage from 170 to 264 V

According to Signify, the product family supports an input voltage range of approximately 170 to 264 V. The current European models have a nominal input voltage of 230V.

As a result, the drivers are suitable for professional European lighting installations.

Long service life

The current models have a rated service life of up to 100,000 hours. As a result, the drivers are suitable for projects where maintenance and reliability are important.

In addition, the Xtreme platform combines this long service life with robust electrical protection.

IP20: intended for recessed installation

Although Signify classifies this series under "Outdoor Drivers," the current models have a IP20 rating. The driver itself is therefore not intended for unprotected outdoor installation.

The driver must be integrated into a suitable luminaire or a protected enclosure. Ultimately, the design of the entire luminaire determines its level of protection against water and dust.

Key Features

• Sensor Ready Interface
• D4i-certified
• DALI Support
• SimpleSet Wireless Configuration
• Integrated power supply for sensors and communication modules
• Energy Consumption Measurement
• Comprehensive Diagnostics
• Constant Light Output
• Temperature Protection Module
• Up to 100,000 hours of rated service life
• Suitable for connected outdoor and industrial lighting

For smart city and connected lighting projects

The Xitanium LED Xtreme Drivers – SR provide a comprehensive foundation for connected professional lighting. This makes it easy to prepare luminaires for sensors, wireless networks, and modern lighting management systems.

Therefore, please contact LED Goeroe for advice on the correct power rating, current range, and the desired Sensor Ready configuration for your project.